3-Fold-Seam V.1200P Tape — Specifications
| Specification | Detail |
|---|---|
| Product Type | Glass-fibre sealing tape, triple seam (3-fold) |
| For Machine | LAVA V.1200P (industrial, 121cm bar) |
| Seal Type | Triple seam |
| Function | Covers the seal bar so bag film does not stick during welding |
| Property | Heat-resistant, antistatic |
| Installation | Tool-free, release the holders and replace the strip |
| Brand | LAVA |
The Correct Tape for the V.1200P
The V.1200P is the largest LAVA machine, with a 121cm seal bar and a triple seam system. This 3-fold glass-fibre sealing tape is sized for that long industrial seal bar.
Industrial Bar Length
Built for the full-length seal bar on the LAVA V.1200P.
Triple Seam Tape
Correct for three parallel welds, not single or double seam machines.
Simple Replacement
Release the holders, replace the strip, and refit the holders.
Clean Welds Across the Full Bar Length
The V.1200P needs tape matched to the full 121cm bar length and the triple seam format. Fitting the correct 3-fold tape helps give a clean, even weld across all three seams and the full bar length.
Match the Tape to the Machine
The V.1200P takes this 3-fold tape. Double-seam machines take the 2-fold tape, and single-seam machines take the 1-fold tape.
Industrial Triple Seam
Three parallel welds give the strongest, most secure seal LAVA produces, which is what high-volume and industrial users need.
Clean Bag Release
The tape covers the hot seal bar so bag film does not stick during welding.
Heat-Resistant and Antistatic
Built to handle repeated sealing cycles while helping the bag release cleanly.
High-Volume Industrial Use Wears Tape Faster
Like all seal-bar tape, this is a wear part. On a high-volume industrial machine, it takes heat on every seal and can brown, fray, or build up residue sooner.
Bags Stick
Bag film catches or sticks to the seal bar after welding.
Seals Are Messy
Welds look uneven, incomplete, rough, or less consistent than usual.
Tape Looks Worn
Browning, fraying, residue buildup, or visible scorching means the strip is due.
Tool-Free Replacement
Disconnect, release holders, replace strip, refit holdersDisconnect the Machine
Switch off and disconnect the V.1200P before working around the seal bar.
Release the Holders
Release the holders at each end of the existing tape.
Remove the Old Strip
Peel off the old tape from the triple seam seal bar.
Lay the New 3-Fold Tape
Position the new strip neatly along the full length of the bar.
Refit the Holders
Secure the strip in place and clean sealing returns.
Made for the Largest LAVA Sealer
This replacement strip is for the V.1200P only, where a very long industrial bar and triple seam format need the correct 3-fold tape.
